Should either of the camera heads get out of alignment, the following procedure should be followed:
-
Go to Video+Content transmit mode
and ensure that the image appears aligned.
-
If the image is out of alignment
while in Video+Content mode, then perform manual alignment via the set screws
on the camera module located underneath the cap.
-
If the image is not out of
alignment while in Video+Content mode, then perform digital alignment via the
Windows Equal-i Control app or via a telnet session. To do this:
b. Make Digital X/Y Fine Adjustments while in the mode, being sure to save settings when done.
c. Switch between other framing modes to ensure that alignment is set properly in other modes.
Note: You should always manually adjust in Video+Content mode first, then perform Digital X/Y Fine Adjustment to other modes.